Safetrack Shrouded DSL Conductor Bus Bar System

Approx. Rs 800 / MeterGet Latest Price

SafeTrack insulated conductors are designed in accordance to international regulations for multitude of power supply applications such as EOT Cranes, Monorail Hoists for straight / curved path, Transfer Cars, Electric trolleys, Bus trucking, Amusement Parks, etc.

These conductors are compact, insulated, easy to install, in horizontal or vertical configuration. They require much less space compared to conventional Angle Iron / Bare conductor systems.

Safetrack Current rating in PIN Type joint: 40A / 100A / 125A 250A / 315A  

• Stainless Steel (S.S) Conductor rated 40A

• Galvanised Iron Conductor (G.I) rated 100A / 125A

• Copper (Cu) Conductor rated 250A / 315A

• Conductor bar length: 4 meters

• Conforms to IP 21 Standards

• Suitable for Indoor / outdoor installation

• Suitable for Straight path / on request for Curved path

• Uni pole / Multi pole mounting

• Conductors can be mounted side by side. (Minimum centre distance: 30mm for indoor and 40mm minimum for outdoor)

The rolled conductor bars are 4 or 4.5 meters long, depending upon the model, to be supported at every 1 meter, effecting considerable savings in installation. Conductors are easily assembled at site with the use of a jointing tool. All bars are supplied with connecting pins.

Design allows uni pole or multi pole mounting arrangement. Conductors can be mounted side by side with minimum centre distance of 30mm minimum for indoor and 40mm minimum for outdoor.

MOUNTING: Insulated hanger clamps support conductor. Standard mounting brackets are available or designed for specific requirement. The conductor can be mounted horizontally or vertically. No minimum clearance required with other structures.

FEED TERMINALS: The power feed point can be at the ends or anywhere along the run. One or more power feed point positions possible to reduce voltage drop. Feed terminal clamps should preferably be installed at rail joints.

END CAPS: The open ends / end feeds of conductors are covered by end caps.

CURRENT COLLECTOR: A fully articulated sliding type collector assembled from strong, purpose designed, glass filled nylon moulding. This design produces compact unit fully insulated from the support bracket. S.S Spring ensures adequate contact pressure.

EXPANSION JOINTS: In order to accommodate the effects of temperature change, it is necessary to provide expansion joints, where system run exceeds 200meters for G.I and 150meters for Copper.

INSTALLATION: Safetrack can be installed in most type of atmospheres such as dirty, dusty, acidic, chemical etc. No crane gantry is perfectly free or level, Safetrack acknowledges this fact by designing adequate lateral/vertical tolerances on collector.

Suitable for outdoor applications also.

MAINTENANCE COST: Only consumable item is contact shoe. No periodic maintenance is required.

ADVANTAGES OVER ANGLE IRON CONDUCTOR SYSTEM: 

• It is insulated, finger safe and accident free.

• It is colour coded R Y B G.

• No protection guard required.

• It is compact and occupies less space.

• No sparking - spring loaded current collector provide pressurised electrical contact.

• It is better resistant to atmospheric conditions. For severe conditions S.S. Conductor are available.

Additional Information:

Approx. Rs 40 / PieceGet Latest Price

On request, Single Pole Hanger Clamp is also supplied in Nylon material for high temperature resistant application.

In addition, Three Pole Hanger clamps, Four Pole Hanger clamps are also supplied as per customer''s Shrouded DSL conductor bus bar system of Safetrack SF1, SF2, SF3, SFS4.

If hanger clamp of existing model / type is not identifiable, Customers can send photo images with Name, Company address and mail ID to get quotation. A catalogue is also attached for ready reference.

Additional Information:

Approx. Rs 40 / PieceGet Latest Price

Additional Information:

Approx. Rs 175 / PieceGet Latest Price

Powermech offers Four Pole Hanger Clamp suitable for SAFETRACK DSL shrouded conductor busbar system. 

In addition, Single Pole Hanger clamp, Three Pole Hanger clamps, Four Pole Hanger clamps are also supplied as per customer's Shrouded DSL conductor bus bar system of Safetrack SF1, SF2, SF3, SFS4.

If hanger clamp of existing model / type is not identifiable, Customers can send photo images with Name, Company address and email ID to get quotation. A catalogue is also attached for ready reference.

Additional Information:

Approx. Rs 140 / PieceGet Latest Price

Powermech offers Three Pole Hanger Clamp suitable for SAFETRACK SF2 DSL shrouded conductor busbar system. 

In addition, Single Pole Hanger clamps, Four Pole Hanger clamps are also supplied as per customers Shrouded DSL conductor bus bar system of Safetrack SF1, SF2, SF3, SFS4.

If hanger clamp of existing model / type is not identifiable, Customers can send photo images with Name, Company address and mail ID to get quotation. 

Additional Information:

Approx. Rs 250 / PieceGet Latest Price

Powermech supply L type Support bracket / Web Bracket for Shrouded DSL conductor busbar system.

The usual spacing is 1000 mm (1 meter). But it is recommended to locate Support Bracket at a spacing that is divisible into the conductor bar lengths. This will always ensure that the joint positions do not interfere with the support brackets.

It is important to ensure all brackets are aligned in horizontal and vertical plane.

For Single Pole Hanger Clamp, the Support Bracket has 4 Slots and the slot size is 10 x 18 mm.

For Four Pole Hanger Clamp, the Support Bracket has 1 Slot and the slot size is 10 x 18 mm.

Support Brackets are supplied as per Model / Type of  Safetrack Shrouded DSL Conductor Busbar System:

Additional Information:

Approx. Rs 900 / PieceGet Latest Price

Additional Information: