Product Price :Get Latest Price
Product BrochureProduct Details:Model Name/Number | Model: ACC 03, ACC 10, ACC 102, ACC 122. |
Brand | POWERMECH |
Usage/Application | EOT Cranes and Overhead Cranes |
Distance | 0-3 to 0-10 and 12 METERS |
Contacts Rating: | 5 Amps ( max. ) at 220 V AC |
Housing | Metal Housing |
+91 9940429288, 8925066613, 9677125589 | |
info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
Weight | 1.5 Kgs (Approximately) |
Output | Potential Free Relay Contacts |
Dimensions | 180 mm X 145 mm X 55 mm |
Range Adjustment | Provided ( up to 50 % approx. ) |
Supply Voltage: | 110 V AC or 220 V AC (User Selectable). |
Laser Alignment tool: | Provided for Alignment of sensor and reflector. |
Output connections | Through Terminal Strip |
Reflector Size: | 75 x 130 mm |
Price | Price varies depending on model. |
Country of Origin | Made in India |
The EOT Crane Anti collision sensor system is a safety device to avoid to collision of two electric overhead travelling cranes working on the same rails. For one pair of cranes one sets of anti-collision systems are required as shown in picture. Each set consists of an Emitter/sensor module and a Reflector.
Anti collision sensor device works on the principle of retro reflective infrared waves. It consists of an emitter and sensor module and special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm single and stops/ reduce the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 0-3 to 0-10 and 0-20mtr meters.
The anti collision system is specially designed for the crane application and is suitable for continuous duty.
Additional Information:
Approx. Rs 9,990 / NumberGet Latest Price
Product Details:Minimum Order Quantity | 1 Number |
Usage/Application | EOT Cranes, Industrial, Factories, Workshops, Oil refineries, Ships, etc. |
Voltage | 220 / 250 VAC. Other voltages on request: 24V, 48V, 110VAC. |
Supply Voltage Type | AC |
Audible Distance/Range | 200 meters (diametrically). |
Brand | Kheraj |
Supply Voltage: | 220 / 250 V AC. |
Colour of Lens: | RED / AMBER |
Material of Lens: | Poly Carbonate Glass. |
Size: | Height: 345mm x Length: 195mm x Width: 150mm. |
Current: | 60W. |
Colour of Painting: | Half white. |
No. of Tones | 3 different tones. Volume controllable. |
Mounting: | Base Mounting & Wall Mounting. |
Volume: | Adjustable with Volume control switch. |
Material of Housing: | Sheet Metal. |
info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
Type of Light: | Flashing |
+91 9940429288, 8925066613, 9677125589 | |
Type of Painting: | Powder coated. |
Country of Origin | Made in India |
Additional Information:
Product Price :Get Latest Price
Product Details:Material | Polyester |
Brand | FERRETERRO |
Color | Violet, Green, Yellow, Grey, Red, Brown, Blue, Orange. Color varies as per lifting capacity. |
In Accordance with: | EN 1492-1:2000 or ASME B 30.9 |
Test Certificate: | OEM Test Certificate issued. |
info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
+91 9940429288, 8925066613, 9677125589 | |
Maximum working temperature: | 90 Degree Centigrade. |
No. of Ply: | Double Ply, Heavy Duty. |
Safety Factor: | 7:1 and 5:1 |
Sleeves (Optional): | Anti-abrasion sleeves and anti-cutting sleeves protection are supplied on request. |
High strength to weight ratio: | Weight 80% less than Equivalent Wire or Chain Slings. |
Width: | Available upto 600 mm. |
Low Stretch Factor: | Elongation 3 to 7% |
Country of Origin | Made in India |
Powermech supplies Heavy Duty Duplex Webbing Slings are lightweight and are less likely to scratch or damage the load being lifted. They resist mildew and bacterial growth and have excellent elongation properties.
Duplex Slings have double layers of webbing and is made with two synthetic fabric layers stitched together for extra reinforcement.
Precautions must be taken before and while using a webbing sling. Webbing sling is not to be used when Safe Working Load is not known, or the eyes or other part of the webbing sling is damaged or if the sling’s eye opens more than 20°. Alkalis or Alkali (Chemicals with a pH level higher than 7), substances of sea water, baking soda, bleaches, lye and even blood will damage a polyester webbing sling, but not affected much by acid.
Webbing slings are to be stored in a dry, cool place and not in damp conditions. And also to be kept away from out of sunlight or other ultra-violet radiations.
Additional Information:
Approx. Rs 4,100 / PieceGet Latest Price
Product Details:Minimum Order Quantity | 1 Piece |
Body Material | Steel Sheet |
Supply Voltage | 4 terminal wiring with one common neutral and three phase wiring |
Colour | Red,Yellow and Blue |
Size | 555 mm x 100 mm x 180 mm |
Weight | 1.5 Kgs (Approximately) |
Price | Price varies depending on range and model. |
Operating Power | 4.5Watts / Phase |
Application | EOT Crane,Over head crane busbar system |
info@powermechengineering.com (Note: Quotation will be submitted on receipt of Email enquiry). | |
+91 9940429288, 8925066613, 9677125589 | |
Country of Origin | Made in India |
DSL Busbar Phase Indicator Lamp for for Cranes. To protect single phasing, we supply Phase Indicator System for Crane DSL Bus Bar with best quality LED Lamps and the body of the indicator is powder coated. This Indication lamp can be connected to bus bar or panel board of crane. Busbar 3 Phase power indication approach towards Crane Bus-bar 3 Phase power indication for the overhead cranes. It is a vibration-resistant, solid-state LED based unit which provides a long maintenance free operating life.
Features and Benefits:
• Extremely low power consumption of
• Use of Ultra - bright LED for Omni directional view from long distance.
• Clear indication of Phase energized status of supply on the adjacent bus-bar.so there is no confusion to plant personnel.
• Low cost replacement of incandescent lamps which are generally used for this application.
• Crane Bus-bar 3 Phase power indication for over head cranes.
• Vibration and shock proof design.
• Extremely low power consumption of
• Clear Omni directional visibility due to use of Ultra-Bright LED Lamps.
• Option of RYB or RYG colors.
• Long operating hours.
• In built Low voltage Glow Protection (LVGP) circuit to prevent false indication at leakage input voltage.
• Solid-state reliability.
• Very short payback period.
• Rugged design tropicalised for Indian conditions.
• Quick and easy installation.
• Option of wall mounting bracket or vertical stand mounting.
• Fully tested against humidity, temperature and vibration.
• Extensive transient protection testing has been performed to ensure faultless operation even under severe climatic conditions such as lighting.
• System purpose-designed for long life in carnage environment. Minimal number of moving parts with solid-state circuitry. Hence long uninterrupted service.
Additional Information:
Explore More Products
© Powermech Engineering. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited