Emco Simplatroll Brakes
POWERMECH offers wide range of products Industrial Brakes such as Electromagnetic Brakes, Emco Simplatroll Brakes, Brake Rectifier, Flange Mounted Electromagnetic Brakes, Shaft Mounted Electromagnetic Brakes, Electromagnetic Clutch Brake Combination, Industrial Clutches and EMCO AC Fail Safe Brake.EMCO Simplatroll Fail Safe Electromagnetic Brake type 14.458
Product Price :Get Latest Price
Product Details:| Minimum Order Quantity | 1 Number |
| Replacement for | Emco Simplatroll type 14.438 and 14.448 are also supplied for all sizes. |
| Mode / Type | 14.458.06, 14.458.08, 14.458.10, 14.458.12, 14.458.14, 14.458.16, 14.458.18, 14.458.20, 14.458.25 |
| Voltage | 190 VDC, 24VDC, 96VDC or as required |
Applications: Brake motors, Cranes and Hoists, Elevators, Servo motors, Machine tools, Packaging Machines, Golf carts, Presses, Printing machinery, Steel Plants, Industrial washing machines, Tyre making machinery, Hospital beds, Robotics, Tower cranes, Goods lifts, Construction machinery, Coil winding machinery, X- Ray machines, Wheel chair, Wire drawing machinery, Battery operated electric vehicles, Textile machinery.
EMCO Simplatroll type 14.458 Spring applied Fail Safe Electromagnetic DC brakes.
EMCO Simplatroll type 14.458 Spring applied Fail Safe Electromagnetic DC brake is designed to perform holding as well as emergency stopping functions (Normally On), making it particularly well- suited for brake motor applications. These brakes are electromagnetically actuated with two friction surfaces on a single disc. The braking power is applied by means of compression springs. The braking torque is generated in the no power or in event of power failure condition. These brakes are having torque up to 5000 Nm. Brake are available in various version as per application. Special brake with micro switch, tacho mounting provision, centring flange etc. can be also supplied. Brake is also available for low temperature (-40°C) application.
Emco Simplatroll Spring applied fail safe DC brake type / model is supplied in model such as 14.458.06, 14.458.08, 14.458.10, 14.458.12, 14.458.14, 14.458.16, 14.458.18, 14.458.20, 14.458.25 for different torque.
• Normally “ON” Brake. Torque up to 5000Nm
• Bore: Pilot or as ordered. Coil with ‘F’ class insulation
• Non asbestos friction linings on twin surfaces.
• Dead-man type manual hand release
• Tacho mounting provision possible
• Air-gap monitoring and motor protection possible through micro switch
• Spare Brake disc with liner (ROTOR), Coil, Rectifier (DC Converter) are supplied on request.
Additional Information:
Brake Disc for Emco SIMPLATROLL Type 14.458
Product Price :Get Latest Price
Product Details:| Minimum Order Quantity | 1 Number |
| Brake disc for Emco SIMPLATROLL Type / Model | 14.458.06, 14.458.08, 14.458.10, 14.458.12, 14.458.14, 14.458.16, 14.458.18, 14.458.20, 14.458.25 |
Original Rotor / Brake disc with Non asbestos friction lining on twin surfaces for Emco SIMPLATROLL type 14.458, 14,438, 14,448 Spring applied Fail Safe Electromagnetic DC brake is supplied for all models / type / size.
Applications: Brake motors, Cranes and Hoists, Elevators, Servo motors, Machine tools, Packaging Machines, Golf carts, Presses, Printing machinery, Steel Plants, Industrial washing machines, Tyre making machinery, Hospital beds, Robotics, Tower cranes, Goods lifts, Construction machinery, Coil winding machinery, X- Ray machines, Wheel chair, Wire drawing machinery, Battery operated electric vehicles, Textile machinery.
EMCO Simplatroll Spring Applied Brake Type 14.488
Product Price :Get Latest Price
The EMCO Simplatroll DC Spring Applied double coil brake ist designed to perform holding as well as emergency stopping functions (Normally On), making it particularly well-suited for brake motor applications. This brake can be used with EFF motor series.
This brake having two coils, one is Booster coil & other is holding coil. The holding coil is designed with much lower wattage hence there is ¡°Power Saver¡± feature in this type (14.488 series) Brake which provides added advantage of very fast engagement of the brake also. Due to low power consumption the Brake heating is greatly reduced and hence these brakes can be used in higher ambient temperatures.
Additional Information:
Emco Simplatroll Spring Applied Brake Type 14.457
Product Price :Get Latest Price
Product Details:| Minimum Order Quantity | 1 Number |
| Voltages | 24 VDC, 205 VDC, (105 VDC) |
| Mode / Type | 14.457.03, 14.457.04 and 14.457.05 |
Emco Simplatroll Spring Applied Brake 14.457 is compact pre-assembled brake with flange that are easy to fit and particularly economical with integrating fixing screws. The simple brake designs suit static or dynamic brake duties. Spring force applies the brake and current to a D.C. operated coil releases it. At the low end, these brakes are unique in providing simple spring applied braking down to 0.5 Nm. Manual hand release is also available.
Application: Brake motors, Packaging Machines, Wheel chair, Robotics, Special purpose machine, Air circuit breaker
Features
Torque: 0.5 NM to 2 NM. Two Friction Surfaces Manual Release All Metal Parts Protected from Rust Dust Protecting Seal Coil with Class 'F' Insulation Compact Robust Unit Residual -Free Simple Installation Fast Switching Times Adjustable Brake Torque Simple Construction Stationary Field (No Slip Rings) Simple Wear Adjustment Consistent Operating Characteristics High Operating Frequency & Reliability |
Solid State Rectifier
Product Price :Get Latest Price
Product Details:| Minimum Order Quantity | 12 Number |
| Application | Electromagnetic brakes, Clutches, Clutch brake combinations, Cranes, Hoists application |
Solid State Rectifier Brake Rectifier / Power converter EH Series
EH-series brake rectifier is used to supply DC voltage to DC operated brakes on electric motors, where standard release reaction time of the brake is required.
The primary application of rectifiers is to derive DC power from an AC supply. This rectifier having capacitor & spark suppressor to protect the diode bridge circuit. Spark suppressor protects the coil and contact against impermissibly high induced voltages during DC switching. In the absence of a suppressor circuit, the induced voltage may exceed the permissible values and cause coil failure.
Rectifiers are available with half wave and full wave rectification. Rectifier can produce normal excitation and over excitation. These rectifiers are compact in size & easy to mount in terminal box or in control panel. Rectifier available with over excitation is used specifically with large DC coils for crane/Hoist brake application. This rectifier mainly used for spring applied electromagnetic brake. Also used for DC electromagnetic brakes, clutches, clutch brake combination. A connection diagram will be furnished with each rectifier or upon request.
Brake Rectifier / Power converter Model | Input | Output | Dimensions in mm (L x W x H) |
EH 720 AD | 230 VAC | 207 VDC, 2 Amp. | 55 x 46.5 x 24.0 |
EH 720 BD | 115 VAC | 103 VDC, 2 Amp. | 55 x 46.5 x 24.0 |
EH 720 CD | 230 VAC | 103 VDC, 2 Amp. | 55 x 46.5 x 24.0 |
EH 720 HHD | 415 VAC | 190 VDC, 2 Amp. | 55 x 46.5 x 24.0 |
EH 720 HHD-AV | 460 VAC | 205 VDC, 2 Amp. | 55 x 46.5 x 24.0 |
EH 720 HHD-AVH | 480 VAC | 220 VDC, 2 Amp. | 55 x 46.5 x 24.0 |
Clutch and Brake combination TYPE 14.125
Product Price :Get Latest Price
EMCO SIMPLATROLL CLUTCH BRAKE COMBINATION TYPE 14.125
Electromagnetic clutch and brake combination type 14.125 can be used for continuous start stop function in any drive transmission arrangement of any machine or mechanism. The standard unit comes with an input and output shaft which can be coupled with any other input and output shaft or other items.
Note Flange mounted option for either input or output or both is also available and hollow shaft instead of solid shaft in input or output or both is also available which facilitates an outside driving or driven shaft to be inserted inside the unit.
Clutch brake combination application Machine tools, Special purpose machines, Packaging machines, Conveyors, Welding machines.
FEATURES
Torque in 7.5 to 1250 NM.
Simple to Fit.
Ready inn Assembled Form
Strong Bearing Design.
Totally Encased Unit.
Air Gap Adjustable Without Dismantling.
Good Heat Dissipation
High Operating Frequency.
Long Life.
Single Plate Dry Type.
Slotted Armature for Torque Stability.
Fast Switching Times.
Coil with Class "F" Insulation.
High Operating Reliability.
Special Friction Disc
Stationery Field (No. Slip Rings).
Low Inertia of Rotating parts.
Consistent Operating Characteristics.
Additional Information:
Flange Mounted Electromagnetic Brakes
Product Price :Get Latest Price
Product Details:| Minimum Order Quantity | 1 Number |
| Material | Stainless Steel |
| Usage | Industrial |
| Range | 80 mm to 230 mm |
Being a quality oriented and customer centric organization; we are involved in offering a Flange Mounted Electromagnetic Brakes to the customers. These flange mounted electromagnetic brakes are designs at state of the production unit and are put to strict checking by renowned quality checker team. Finally, these flange mounted electromagnetic brakes can be availed from us at market leading prices.
Features:
- Smooth operation
- Sturdy design
- Long working life
Applications:
- Brake motors
- Machine tools
- Textile machines
- Special purpose machines
- Industrial washing machines
- Coil winding machines
- Wire drawing machinery
- Packing machines, etc
Explore More Products
Chandrasekaran S (Marketing Manager)
Chennai - 600033, Tamil Nadu, India
© Powermech Engineering. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited