Powermech Engineering
Powermech Engineering
Send Email
0804860165585% Response Rate
Search

Welcome to
Powermech Engineering

POWERMECH™ supplies genuine Crane parts, Crane accessories for all make of EOT cranes, Gantry cranes, hoists and provide new solutions and products for material handling equipments.

Powermech EngineeringPowermech Engineering
Welcome to

Powermech Engineering

  • Nature of BusinessExporter and Manufacturer
  • Total Number of EmployeesUpto 10 People
  • Year of Establishment1993
  • Legal Status of FirmIndividual - Proprietor
  • Annual TurnoverRs. 2 - 5 Crore
  • Import Export Code (IEC)04130*****
  • GST No.33AVYPS8392N1Z7

IndiaMART Trust Seal Verified

IndiaMART Verified Exporter

Incorporated in 1993, POWERMECH™ ENGINEERING, as a leading supplier of Crane Parts, Brakes and Crane Accessories offers quality products such as Electromagnetic Brake, Electro hydraulic thruster brake, Push Button Pendant Station, Crane Wireless Radio Remote Control, Festoon Cable Track System, Cable trolley, Cable carrier, Cable drag chain, Cable reeling drum, Limit switch, Crane hook, Resistance Box, Current collector, DSL Shrouded bus bar system, Enclosed type Insulated conductor bar system, etc. Powermech Engineering has also been indulged in manufacturing, supplying and wholesaling of highly qualitative Crane Parts and Accessories.

Our offered range is produced in compliance with the quality guidelines and industry parameters, thus assuring quality performance.

Our Customers are EOT Crane Manufacturer, Cement industry, Chemical industry, De fence, Heavy Industries, Foundries, Mines, Power Plant, Ports, Paper and Pulp producers, Pharmaceutical industry, Railways, Steel Manufacturers, Shipyard, Smelters, Steel Mills and all Engineering Industries.

more...
Hot Offers

Solid State Brake Rectifier
Solid State Brake RectifierEH Series Solid State Rectifier Brake Rectifier / Power converter  EH-series brake rectifier is used to supply DC voltage to DC operated brakes on electric motors, where standard release reaction time of the brake is required. The primary application of rectifiers is to derive DC power from an AC supply. This rectifier having capacitor & spark suppressor to protect the diode bridge circuit. Spark suppressor protects the coil and contact against impermissibly high induced voltages during DC switching. In the absence of a suppressor circuit, the induced voltage may exceed the permissible values and cause coil failure.
Rectifiers are available with half wave and full wave rectification. Rectifier can produce normal excitation and over excitation. These rectifiers are compact in size & easy to mount in terminal box or in control panel. Rectifier available with over excitation is used specifically with large DC coils for crane/Hoist brake application. This rectifier mainly used for spring applied electromagnetic brake. Also used for DC electromagnetic brakes, clutches, clutch brake combination. A connection diagram will be furnished with each rectifier or upon request.

BFK458 Type Intorq Electromagnetic Brake
BFK458 Type Intorq Electromagnetic BrakeINTORQ BFK458 spring-applied brakeTorque range: 1.5 – 600 NmElectromagnetically released spring-applied brakes are used wherever masses in motion have to be decelerated as quickly as possible or where masses must be held in a defined position. The braking force is applied by tappet springs. Thus the braking torque generated by friction locking remains available in the deenergised status – even in the event of mains failure. The brake is released electromagnetically. Fields of applicationBrake motors, Conveyors, Cranes, Storage technology, Industrial trucks, Wood working machines, Stage machinery, Vehicles for the disabled, Automation technology, Controlled drives, Gate drives, Escalators. INTORQ Brake Model / Type BFK 458.06 E, BFK 458.08 E, BFK 458.10 E, BFK 458.12 E, BFK 458.14 E, BFK 458.16 E, BFK 458.18 E, BFK 458.20 E, BFK 458.25 ETorque transmissionDesigned for dry runningA powerful and complete range9 sizesStandard voltages [V DC] 24, 96, 103, 170,180, 190, 205Graduated torque range from 1.5 - 600 NmEnclosure according to IP00 ... IP55, depending on the special operating conditions OptionsHand release for all sizes, both directions can be used for release and mounting (exception: tacho brake)Noise-reduced designsVarious types of corrosion protection and enclosuresMicroswitches used to monitor air gap and wear (size 12 and above)Monitoring of Hand release functionNon-standard voltages and bores on requestPulse width modulation (PWM), sizes 06 – 18 Partial discharge free brake has been developed for operation with the pulse width modulated DC bus voltage of a frequency inverter Rated coil voltage UN=103V DC Quick and easy mountingPreset air gapSpecial machining of the friction surfaces ensures that the rated torques are achieved after very few switching operationsNo locating bearing is required on the brake DurableThe insulation system to temperature class F (155°C) ensures that the winding has a long service lifeThe brakes are designed for 100% duty time (current applied to the brake) Low maintenanceLong rotor/hub connection with low rate of wear and a tried-and-tested involute gearAsbestos-free and solvent-free friction lining with low rate of wear Long Life design BFK458-LArmature plate with low backlash and reinforced torque supportTappet springs with guide pins for protection against shearing forcesAluminium rotor with toothed intermediate ring: friction lining and tooth system with low rates of wear. CCV (Cold Climate Version), temperature resistant up to -40 C CCV design configurable for all sizes in the modular system- Use of chrome-plated friction surfaces (armature plate and flange)- Use of temperature-resistant fixing screws is essential The following components are also approved for use up to -40 C - Rotor with sleeve (noise-reduced)- Hand release- Terminal box- Microswitch- Caps E and N - Shaft sealing rings (available on request). 
...

TR60 Pre-Mounted Copper Busbar Conductor Rail
TR60 Pre-Mounted Copper Busbar Conductor RailPowermech supplies 60 Amps, 4 Pole, Pre-mounted Copper Conductor Rail Part No.TR60604CW. The copper conductors are already inserted in the PVC plastic casing. 
The trolley system complies with the relevant international standards ensuring safety of the operator, easy installation and reliability.
The Busbar trolley system copper conductor rail is safe system for power / energy transmission for various types of equipments such as EOT Cranes, Bridge cranes, Conveyor belts, Chain Conveyors, etc. 
Application: EOT Cranes, Hoists, Recycling Plants Galvanized Plants, Electrical Systems, Automated Conveyors, Building Maintenance, Airport, Terminal Stations, Skyscrapers Cleanroom Technology, People Movers, Vertical Elevators, Inclined Elevators, High-bay Warehouses, Automated Storage, Textile, Agriculture etc....

C Rail Festoon System
C Rail Festoon SystemPOWERMECH offers C Track Rail Festoon System that is used for electrical or energy transmission in EOT Cranes, Jib Cranes, Gantry cranes, Electric hoists, Galvanising process plant, Phosphating process plant, transfer car, transfer trolleys and various type of material handling equipment and moving machinery.
The offered C rail festoon systems are manufactured using the finest quality raw material and modern technology from Giovenzana, Italy. Moreover, we offer these C rail festoon systems to our patrons after make sure that our offered C rail festoon system is of the best in quality in the market.
Special features of our Festoon system:
  • Precision-designed
  • Higher load capacity
  • Excellent performance
  • Longer service life
  • Supplied in ready-to-install condition
  • Simple to install
  • Suitable for Short span and long span
  • Suitable for medium and fast travel speed
  • Replaceable in place of wire rope festoon system and I-beam cable trolley system

Quick delivery:
  • Components for Festoon system:
  • C-Rail bar (Galvanized steel, Load capacity: 100kg/meter)
  • C-Track Coupler with screws
  • Hanger Clamp with bolt (to weld with support bracket L (type)
  • End Stop (Material: PA 6)
  • End clamp with Stationary trolley (Material: PA 6 and galvanized steel)
  • Towing Trolley

Note:
  • As for Pendant cable, a separate and parallel Festoon System can be installed. On request, a Trolley with safety plug and socket connection are additionally supplied to connect the festoon system to the pendant station.
  • Flat cable and Round Pendant cable with dual strain relief steel wires (2mm diameter), Pendant stations are supplied as an accessory on request.
  • Spare components such as Cable trolley, C-Rail bar are also supplied individually for Festoon system.
  • This Festoon system is also widely used in many reputed EOT cranes such as Electromech crane, SUN Crane, K2 crane, INDEF crane, etc. Our Festoon Cable Track System can also be installed in Demag cranes or any other make of cranes.
...

Solid State Rectifier
Solid State RectifierEH Series Solid State Rectifier / Brake Rectifier / Power converter  EH-series brake rectifier is used to supply DC voltage to DC operated brakes on electric motors, where standard release reaction time of the brake is required. The primary application of rectifiers is to derive DC power from an AC supply. This rectifier having capacitor & spark suppressor to protect the diode bridge circuit. Spark suppressor protects the coil and contact against impermissibly high induced voltages during DC switching. In the absence of a suppressor circuit, the induced voltage may exceed the permissible values and cause coil failure.
Rectifiers are available with half wave and full wave rectification. Rectifier can produce normal excitation and over excitation. These rectifiers are compact in size & easy to mount in terminal box or in control panel. Rectifier available with over excitation is used specifically with large DC coils for crane/Hoist brake application. This rectifier mainly used for spring applied electromagnetic brake. Also used for DC electromagnetic brakes, clutches, clutch brake combination. A connection diagram will be furnished with each rectifier or upon request.

Type AC Temporiti Electromagnetic Fail-Safe Brake
Type AC Temporiti Electromagnetic Fail-Safe BrakeTemporiti srl Electromagnetic Spring Applied Fail Safe Brake Model AC POWERMECH offers AC operated electromagnetic spring applied failsafe brakes with Italian collaboration and design of Temporiti srl. These are normally ON type, ie, the brakes are always ON and applied. When an AC voltage is applied, the brake releases, thus allowing the shaft on which they mounted to rotate. In case of no voltage, the brake is applied immediately and the rotating shaft on which the brake mounted is held immediately. This also forms a safety mechanism in which the load is stopped from being moved in case of no power. There is no restriction on ‘On time duration’ and also on number of operations per minute.
General applications are in brake motors, cranes, hoists, material handling equipments, CNC Machines, packing, textiles, and in other machines & varied applications. Temporiti AC fail safe brakes can be used for both LT/CT drives as well as for hoisting applications.
These brakes are also being used for INDEF Chain hoists. 'Temporiti' AC Series 3 Phase AC fail safe brakes are supplied in Type / Models AC 1, AC 2, AC 3, AC 5, AC 6, AC 7, AC 8 and AC 8 and AC 8/D.

Thruster Operated Drum Brake with 34kgs Thruster
Thruster Operated Drum Brake with 34kgs ThrusterThruster Operated Drum Brakewith 34kg capacity ALIMINIUM DIE CAST BODYThruster & Brake shoes
Electro Hydraulic Thruster Brake is used to retard the speed of moving machinery and to stop it accurately to the desired position. The breaking force is applied to the brake shoes by a pre—stressed compression spring.Torque rating for Thruster brake assembly with 18kg Thruster & Brake shoes in ALIMINIUM DIE CAST BODY

Pethe Electromagnetic Brake
Pethe Electromagnetic BrakeSpring loaded failsafe disc brakes, AC operated, DAT model/type
These Failsafe spring loaded disc brakes is normally ON type and operates on AC supply. Foundation is not necessary as they are mounted directly on the non-driving end shaft of the motor. It consists of friction brake disc plate with liner on its both side with square bore/hole at the centre. One corresponding piece of square hub is supplied with the brake. This hub is keyed to the motor shaft and liner plate is free on the hub. Normally, liner plate is gripped between two discs with the help of spring pressure. When current is supplied to the brake, one disc is attracted by electromagnet against spring pressure and the liner plate is released. Thus, the brake is OFF. Once the brake is set it does not require adjustment or maintenance. When the liner plate wears with the use, then only air gap is required to be maintained periodically. Arrangement to release the brake manually is also provided. Brake Model: DAT-130, DAT-140, DAT-150, DAT-150X, DAT-190, DAT-190X, DAT-235, DAT-235X, DAT-290, DAT-290X, DAT-290XX, DAT-03, DAT-04, DAT-05, DAT-05X, DAT-19, DAT-19X, DAT-23, DAT023X, DAT-29, DAT-29X, DAT-31X, DAT-32X, DMT-15, DMT-20, DMT-30, DMT-45, DAT-50X, DAT-75X, DAT-100X, DAT-150H, DAT-150XH. 
Brake Application: Electric wire rope Hoists, EOT Cranes, Brake Motors, Material Handling and Lifting Equipment, Cross travel and Long travel: EOT / Gantry / Goliath / Derrick Cranes, Lifts and Elevators, Cross travel and Long travel: EOT / Gantry / Goliath / Derrick Cranes, Winches and Conveyors, Machine Tools, Wire drawing machines, Rubber mixing mills, Rolling mills, Sugar, Mining, Cement, Textile industries and many other applications.Note:• Brake Model DAT- 130, DAT- 140, DAT- 03 and DAT- 04 is available in 230 V single ph. or two phases; All other brakes are working on 415 V three phase.• DAT series brakes are supplied with plain square (driving) hub & without drill to mounting plate.• Bore & length of driving square hub should be machined as per requirement.• DAT series brakes are supplied with geared hub on request.• In Brake model/type DAT- 130, DAT-140, DAT-150, DAT-150X, DMT-15, DAT- 03 , 04 , 05 , 05X brake shaft is not passing through brake.• Price shall vary for each model / type, specifications and other terms. Please mail us to quotation for the required product.
Electromagnetic disc type spring loaded AC fail safe brake is supplied for replacement in various make of hoists/ cranes such as Avon hoist, Amsak cranes, Ankit Cranes, Apex cranes, Armsel Cranes, Asian Cranes, Atlas cranes, Brady & Morris hoist, INDEF, Intelle cranes, Electromech cranes, Esquare cranes, Grip cranes, Garlick Cranes Jaico hoists, Krans Cranes, Magna cranes, Reva Cranes, Rope master hoist, Sigma hoist, Sun cranes, SL cranes, Shrushti Cranes, Sri Pranav cranes, Saico Cranes, Shrusti, Sriram Engineers, TAK hoist / cranes, Viralishanmuga cranes, Unitech.   ...



 



Showcase Gallery

Reviews & Rating

4.1/5
★★★★★★★★★★

Reviewed by 90 Users

  • 5★51%
  • 4★13%
  • 3★8%
  • 2★8%
  • 1★20%
  • User Satisfaction
  • Response80%
  • Quality     87%
  • Delivery   81%

Most Relevant Reviews

I
★★★★★★★★★★
30-January-23
Illakiya
Chennai, Tamil Nadu
Product Name : Electromagnetic Brakes
Product support is excellent
Response
Delivery
Quality
C
★★★★★★★★★★
30-January-23
Cibithan
Periyakulam, Tamil Nadu
Product Name : Industrial Disc Brakes
good response
Response
Quality
D
★★★★★★★★★★
30-June-21
Divyakant
Ankleshwar, Gujarat
wonderful service
Response
Quality
Delivery

Contact via E-mail
Contact via SMS
Chandrasekaran S (Marketing Manager)
Powermech Engineering
New No. 21, Old No. 9, First Floor, Rajagopalan Street (Off Jubilee Road), West Mambalam
Chennai - 600033, Tamil Nadu, India
Call Us: 
Call Response Rate: 85%
Share Us :



© Powermech Engineering. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Powermech Engineering